Friday, August 3, 2012

Cisco 2951 + ISM-VPN-29 + show environment + %PLATFORM-2-SM_ERROR

c2951#sh ver | in IOS
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.2(3)T1, RELEASE SOFTWARE (fc1)
c2951#
c2951#sh inv
NAME: "CISCO2951/K9 chassis", DESCR: "CISCO2951/K9 chassis"
PID: CISCO2951/K9      , VID: V01 , SN: XXXXXXXXXXX

NAME: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1"
PID: VWIC2-1MFT-T1/E1  , VID: V01 , SN: XXXXXXXXXXX

NAME: "WAN Interface Card - HWIC Serial 2T on Slot 0 SubSlot 1", DESCR: "WAN Interface Card - HWIC Serial 2T"
PID: HWIC-2T           , VID: V02 , SN: XXXXXXXXXXX

NAME: "PVDM3 DSP DIMM with 32 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 32 Channels"
PID: PVDM3-32          , VID: V01 , SN: XXXXXXXXXXX

NAME: "PVDM3 DSP DIMM with 32 Channels on Slot 0 SubSlot 5", DESCR: "PVDM3 DSP DIMM with 32 Channels"
PID: PVDM3-32          , VID: V01 , SN: XXXXXXXXXXX

NAME: "Internal Services Module - Crypto Engine on Slot 0", DESCR: "Internal Services Module - Crypto Engine"
PID: ISM-VPN-29        , VID: V01 , SN: XXXXXXXXXXX

NAME: "C2921/C2951 AC Power Supply", DESCR: "C2921/C2951 AC Power Supply"
PID: PWR-2921-51-AC    , VID: V01 , SN: XXXXXXXXXXX


c2951#
c2951#sh env
SYSTEM POWER SUPPLY STATUS
==========================
 Internal Power Supply  Type: AC
 Internal Power Supply  12V Output Status: Normal

 External Redundant Power Supply is absent or powered off

SYSTEM FAN STATUS
=================
 Fan 1 OK, Low speed setting
 Fan 2 OK, Low speed setting
 Fan 3 OK, Low speed setting
 Fan 4 OK, Low speed setting

SYSTEM TEMPERATURE STATUS
=========================
 Intake Left temperature: 21 Celsius, Normal
 Intake Right temperature: 19 Celsius, Normal
 Exhaust Left temperature: 27 Celsius, Normal
 Exhaust Right temperature: 21 Celsius, Normal
 CPU temperature: 44 Celsius, Normal
 Power Supply Unit temperature: 37 Celsius, Normal

REAL TIME CLOCK BATTERY STATUS
==============================
 Battery OK (checked at power up)

SYSTEM POWER
===============
 Motherboard Components Power consumption = 72.4 WPower consumption =
 ISM 0.0 W
 Total System Power consumption is: 72.4 W

 Environmental information last updated 00:00:08 ago

c2951#
c2951#sh log | in PLATFORM
Aug  2 14:52:18 MY: %PLATFORM-2-SM_ERROR: The SM Slot number 0 does not exist on the IO Controller
Aug  2 14:52:18 MY: %PLATFORM-2-SM_ERROR: The SM Slot number 0 does not exist on the IO Controller
c2951#
c2951#sh clock
14:52:23.517 MY Thu Aug 2 2012
c2951#

2 comments:

  1. 15.2(4)M1 is the newly suggested IOS. Also there is a bug in software that requires a permit of GRE on the outside interface if your outside interface has an ACL inbound.

    ReplyDelete